4REarth

The 4 Rs => Reuse Or Renew => Garden => Topic started by: Shadav on October 20, 2020, 03:01:53 PM

Title: Plastic Bottle Planters
Post by: Shadav on October 20, 2020, 03:01:53 PM
Here are some nice/cute ideas for some planters
Some of the instructions are similar to
4REarth > DIY Self-Watering Seed Starter Pots - page {#} (https://4rearth.info/forum/garden/diy-self-watering-seed-starter-pots/)
and
4REarth > Juice Carton Planters - page {#} (https://4rearth.info/forum/garden/juice-carton-planters/)

you can read those for instructions

[ This attachment cannot be displayed inline in 'Print Page' view ]
Instructions
Use a sharp utility knife to cut off the base of the bottle about 1 inch above the bottom, and then wash and try the bottle thoroughly.

[ This attachment cannot be displayed inline in 'Print Page' view ]

Cover the exposed edge of the bottle with masking tape, and then punch 4 holes around it at regular intervals for the twine. Cut equal lengths of twine and tie them securely through these holes. When you gather the ends together, the planter should hang straight down and not veer off at one angle or another.

Cut a short length of aluminum foil, roll it into a tube, and line the bottle with it. This will add an insulating layer that serves a dual purpose: it’ll keep sunlight from drying out the soil, and it will draw heat from those happy sunbeams to keep the plant’s roots toasty-warm.

Select the type of plant you’d like to grow. If you’re growing plants indoors, aim for culinary herbs like basil, parsley, cilantro, thyme, and rosemary, or simple lettuces like arugula. If you’ll be hanging these outside, you can plant small tomatoes, hot peppers, and even squash! Just make sure to top up the soil of outdoor plants so they don’t get depleted as they grow their fruits or vegetables.

Curl the tops of the seedlings in together to form a spear-like shape, and thread that gently through the pop bottle’s drinking spout so the leafy bits are sticking out the top, and the roots/soil are dangling inside. Flip the bottle so the spout is facing downward, and add in your soil. Don’t pack it in so tightly that the roots can’t spread out, but nudge it enough so the plantis held securely.

Hang the planter in a place where it gets plenty of sunlight and water appropriately. If water pours out the bottom where the leaves poke out, you’ve drenched it too much—it’ll take some practice to gauge the amount of water needed to keep the soil and roots moist without drowning the plant. Take into consideration the watering needs of the plants you’ve selected: hardy herbs like thyme and rosemary won’t need as much watering as lettuces, tomatoes or basil.

You’ll be surprised at how quickly your plants will grow, and how much space is saved by cultivating them in this manner. Just make sure that you never cut more than 30% of a plant’s leaves at any harvest or it might die. Treat them gently and respectfully, and there will be joyful thriving all around.

source: https://inhabitat.com/how-to-make-a-hanging-planter-with-a-recycled-plastic-pop-bottle/

[ This attachment cannot be displayed inline in 'Print Page' view ]

[ This attachment cannot be displayed inline in 'Print Page' view ]
use the tops of other bottles for the legs
glue the legs on, paint the pig, use googly eyes for fun

[ This attachment cannot be displayed inline in 'Print Page' view ]

[ This attachment cannot be displayed inline in 'Print Page' view ]

[ This attachment cannot be displayed inline in 'Print Page' view ]